top of page

UE P116

  • Using CAT.5 network patch cords support power for the wireless AP/CPE and IP camera/PTZ
  • Networking standard: IEEE802.3af/at/bt
  • POE power light blinks to determine the power status of the receiving end, and each blink is 2.7 watts.
  • PoE Watchdog AI Function: Detection front-end PoE cameras and PD, Automatic detection, Automatic restart
  • Upload port automatic flip (Auto MDI / MDIX)
  • 6KV lightning protection, 8KV surge protection, anti-reverse connection, over-current protection, over-voltage protection, over-temperature protection, Short circuit protection
  • The Max output power of the port is 60W, which is convenient for hi-power equipment
  • Zero configuration feature power supply is automatically supplied to the adaptive equipment
Network Port 1*1000Mbps SFP Port+2*1000Mbps Uplink ports + 2*1000Mbps PoE port(Compatible uplink) + 14*100Mbps PoE ports
Transfer Rate 2000Mbps Full Duplex; 10 or 100 or 1000Mbps Half Duple
Performance Bandwidth: 12.80Gbps ; Network Latency (10 to 1000Mbps): ≦16μs (use the 64byte package size) ; MAC address table: 8K ; The Frame Filter & Transmission Rate: 14800pps the most for 10M port, 148800pps the most for 100M port,1488000pps the most for 1000M port
Network protocol and standard EEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX/ IEEE 802.3ab 1000BASE-T IEEE 802.3xFlowControl IEEE 802.3af/at/bt Power over Ethernet
Power Power input: AC 110~220V Total≤400W ; PoE Watchdog: Port 1~16 ; Power output: PoE1~14Port:1/2(+52V),3/6(GND)≤30W PoE 15~16 Port:1245(+53V),3678(GND) compatible1/2(+52V),3/6(GND)≤60W
Input Voltage Range AC 110~220V Total≤400W

 

bottom of page